Why does my Ricoh MP C6004 All in One Printer turn off automatically?
If your Ricoh All in One Printer turns off automatically, the Weekly Timer setting might be set to [Main Power Off]. Change the Weekly Timer setting.
Why Ricoh All in One Printer doesn't enter sleep mode?
If your Ricoh All in One Printer indicator lamp remains lit and the machine does not enter Sleep mode after pressing [Energy Saver], ensure that Sleep mode can be enabled. Check the settings to enable Sleep mode before pressing [Energy Saver].
Why are User Tools missing on Ricoh All in One Printer?
If the User Tools menu on your Ricoh All in One Printer is missing items after turning it on, it indicates that functions other than the copier are still initializing. The missing functions will appear in the User Tools menu once they are ready for use.
What to do if Ricoh MP C6004 shows an error after closing the cover?
If your Ricoh All in One Printer displays an error message after closing the indicated cover, it could be because other covers are still open. Ensure that you close all the covers on the machine.
What to do if touch screen is not responding on Ricoh MP C6004 All in One Printer?
If the display panel on your Ricoh All in One Printer does not respond to touch, ensure the power is turned on. Check that the main power indicator is off, and then turn the power on.
How to enable duplex printing on Ricoh MP C6004?
If your Ricoh All in One Printer does not print in duplex mode, it may be because the selected paper type is unsuitable for duplex printing. In "Tray Paper Settings", choose a paper type that supports duplex printing.
Why Ricoh All in One Printer cannot print in duplex mode?
If your Ricoh All in One Printer does not print in duplex mode, it might be because the selected paper tray isn't set for duplex printing. Change the "Apply Duplex" setting in "Tray Paper Settings" to enable duplex printing for the paper tray.
How to turn on display on Ricoh MP C6004 All in One Printer?
If your Ricoh All in One Printer display is turned off, it is likely in Sleep mode. Touch the display panel to wake it.
Why Ricoh MP C6004 All in One Printer does not print when there is no paper?
If documents and reports are not printing from your Ricoh All in One Printer, ensure that there is paper in the tray. If there is no paper, load paper into the tray.
Why is my Ricoh MP C6004 not connecting to the network?
If your Ricoh All in One Printer is not connecting to the network, ensure the machine is correctly connected and properly set up. If issues persist, contact your administrator. If the indicator lamp remains lit after troubleshooting, contact your service representative.
General| Print Speed (Black) | 60 ppm |
|---|---|
| Print Speed (Color) | 60 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Copy Speed (Black) | 60 ppm |
| Copy Speed (Color) | 60 ppm |
| Copy Resolution | 600 x 600 dpi |
| Fax Resolution | 200 x 200 dpi |
| Duplex Printing | Yes |
| Automatic Document Feeder (ADF) | Yes |
| ADF Capacity | 100 sheets |
| Memory (RAM) | 2 GB |
| Hard Disk Drive | 320 GB |
| Type | All in One Printer |
| Scan Resolution | 600 dpi |
| Paper Capacity | 4, 700 sheets |
| Standard Paper Capacity | 1, 200 sheets |
| First Print Time (Color) | 5.5 seconds |
| Connectivity | USB, Ethernet |
| PDL | PCL 5c, PCL 6, PostScript 3 |
Methods to protect documents from unauthorized access and control machine settings.
Explains the fundamental steps for sending documents using memory transmission.
Steps to scan documents and send them to a shared folder on a computer.
How to scan documents and send them as email attachments.
Procedure for saving scanned documents onto the machine's hard disk for later retrieval.
Precautions and procedures for adding toner, including handling spilled toner.
Explains meanings of status icons indicating machine conditions or required actions.
Addresses common issues encountered during machine operation and their solutions.
To Next Page
