• 200-sheet book block: 20 mm (0.80 inches)
Specify the cover sheet size based on the thickness of the book block spine. Use the following
equation to calculate the length of the cover sheet:
Minimum length of cover sheet (mm/inch) = "length of book block sheet (mm/inch)" × 2 +
"thickness of spine (mm/inch)"
To perfect bind a booklet with the following dimensions, specify a cover sheet length of at least
440 mm (17.4 inches):
1. Length of book block sheet
2. Thickness of spine
3. Length of cover sheet
1. While lightly pinching the side fence, align it with the paper size to be loaded.
2. Load paper face up and neatly stacked.
Do not stack paper over the limit mark.
Loading Paper
41
To Next Page
Loading...
