Ricoh C9100 - Page 82

Problem Cause Solution
Paper delivered to the high
capacity stacker is curled,
causing it to not align
properly.
Paper is curled. • When the paper is curled
downward, select [Adjust
Curl: Weak], [Adjust Curl:
Medium], or [Adjust Curl:
Strong] under [Adjust Paper Curl]
in "Adjustment Settings for
Operators".
• When the paper is curled
upward, select [Adjust Curl:
Weak], [Adjust Curl:
Medium], or [Adjust Curl:
Strong] under [Adjust Paper Curl]
in "Adjustment Settings for
Operators".
For details about Adjustment Settings
for Operators, see "Adjustment Settings
for Operators", Paper Settings.
Output paper to the stacker
tray does not align properly.
• When using coated
paper, the output
paper to the stacker
tray might fail to align
properly.
• When the paper weight
is 280.0 g/m
2
or
more, and the paper
size is A3, SRA3 or
larger, the output
paper to the stacker
tray might fail to align
properly.
Select [Adjust Curl: Weak], [Adjust
Curl: Medium], or [Adjust Curl:
Strong] under [Adjust Paper Curl] in
"Adjustment Settings for Operators".
For details about Adjustment Settings
for Operators, see "Adjustment Settings
for Operators", Paper Settings.
5. Troubleshooting
80