Ricoh C9100 - Page 88

• The default period the machine waits before entering Low Power mode is 15 minutes. This
default time can be changed.
Sleep mode
• If this machine remains idle for a specified period or when the [Energy Saver] key is pressed, it
enters Sleep mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep mode is 59 minutes. This
default time can be changed.
• The machine can print jobs from computers while in Sleep mode.
Specification
• (mainly Europe and Asia)
Type 1 Type 2
Reduced electrical consumption in Low
Power mode
*1
419.8 W 421.5 W
Time of switch into Low Power mode 15 minutes 15 minutes
Time of switch out from Low Power
mode
*1
160 seconds 160 seconds
Reduced electrical consumption in
Sleep mode
*1
2.0 W 2.0 W
Time of switch into Sleep mode 59 minutes 59 minutes
Time of switch out from Sleep mode
*1
540 seconds 540 seconds
Duplex Function
*2
Standard Standard
*1
The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
*2
Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used
with) a duplex tray and the duplex function is enabled as an option.
• (mainly North America)
Type 1 Type 2
Reduced electrical consumption in Low
Power mode
*1
425.4 W 455.6 W
Time of switch into Low Power mode 15 minutes 15 minutes
6. Information for This Machine
86