102
Protecting Multiple Files at Once
To protect selected files all at once, follow the steps below.
1. Turn the mode dial to 6.
2. Press the 9 button.
The screen is split into six sections and thumbnail images are displayed in
a reduced size.
3. Press the !"#$ buttons to select the first file of the
selection.
4. Press the M button.
The Playback menu appears.
5. Press the " button to select [PROTECT] and press the O
button.
6. Press the !"#$ buttons to select
the next file of the selection, and
then press the O button.
The Protect symbol appears in the upper-
right corner of the file.
7. Repeat Step 6 to select all the files
you wish to protect.
If you selected a file by mistake, you can deselect by selecting the file and
pressing the O button again.
8. Press the M button.
The display indicates that the selected images are being processed; once
finished, the display returns to the Thumbnail Display screen.
Note
To remove protection from multiple files, follow the same steps described above to select
them and remove protection.
Reference
For details on thumbnail display, see P.47.
To Next Page
Loading...
