Ricoh CX5 - Assigning a Role to the Fn Button; Shifting the AF Target for Macro Shooting

56
2
Using the Fn (Function) Button
Assigning a Role to the Fn Button
To assign functions to the Fn button, follow the steps below.
1
Select [Set Fn Button] in the setup
menu (GP.109) and push the
ADJ./OK button F.
2
Select the setting and then press
the ADJ./OK button.
Shifting the AF Target for Macro Shooting
You can select the focus target for close-ups.
1
Set [Set Fn Button] to [Macro Target] on the setup menu.
2
With the camera ready to shoot,
press the Fn button.
• The macro target shift screen appears.
Cancel
CancelCancel
Cancel Ok
OkOk
Ok
3
Push the ADJ./OK button !"NF to move the cross-mark to
the desired target position.
4
Press the ADJ./OK button.
• Pressing the DISP. button cancels the macro target shift function.
5
Press the shutter release button halfway and then gently
press it the rest of the way down.
• The camera focuses on the area at the position of the cross-mark.
• Pushing the ADJ./OK button toward N (Macro) cancels the macro
target shift function.
Note -------------------------------------------------------------------------------------
If the AE/AF target shift function is activated using the ADJ./OK button (GP.53)
and not canceled, the macro target shift function cannot be used by pressing the
Fn button.