144
Solution:
Curl the sheet upward.
To do this, the decurler unit must be attached.
1.
In the [Adjustment Settings for Skilled Operators] menu, set [0116: Adjust
Paper Curl] to [Adjust Curl: Weak].
2.
Print the image. Is the problem resolved?
Yes
Finished!
No
Go to the next step.
3.
Set [0116: Adjust Paper Curl] to [Adjust Curl: Strong].
4.
Print the image. Is the problem resolved?
Yes
Finished!
No
Contact your service representative.
Note:
• The top sheet of each offset bundle of delivered sheets may protrude above the
rest of the bundle by about 7 mm.
Stacker shift tray
Paper feed direction
CEZ605
To Next Page
Loading...
Need help?
General
