67
Solution:
1.
Print the image on twenty sheets. Do glossy lines appear on the tenth sheet
and later sheets?
Yes
Go to the next step.
No
You cannot resolve the problem with this procedure. Contact your
service representative.
2.
In [Advanced Settings] for the custom paper in use, select [44: Fusing Heat
Roller Temperature Adj.] and decrease the value by 5 °C.
3.
Print the image on twenty sheets. Do glossy lines appear on the tenth sheet
and later sheets?
Yes
Repeat Step 2 and 3. If the problem persists even though the setting
has reached its minimum value, contact your service representative. If
the problem is resolved, go to the next step.
No
Go to the next step.
4.
Check the toner fusion. Is it satisfactory?
Yes
Finished!
No
Restore the previous setting and contact your service representative.
To Next Page
Loading...
Need help?
General
