75
<Black-and-white printing>
1.
In [Advanced Settings] for the custom paper in use, set [35: Paper Transfer
Current; Lead Edge: B&W] to "100%".
2.
Print 25 sheets of the image. Is the problem resolved?
Yes
Finished!
No
Go to the next step.
3.
Set [35: Paper Transfer Current; Lead Edge: B&W] to "80%".
4.
Print 25 sheets of the image.
• If paper misfeeding no longer occurs, the problem has been resolved.
• If the leading edge of the printed image becomes faint as a result of this, go
to the next step.
• If the paper misfeeding persists, skip to step 7.
5.
Set [37: Ppr Transfer Current Lead Edg Dist: BW] to "5 mm".
6.
Print the image. Is the problem resolved?
Yes
Finished!
No
Contact your service representative.
7.
Increase the leading edge margin in the print settings for the image to be
printed.
8.
Set [35: Paper Transfer Current; Lead Edge: B&W] to "0%".
9.
Print 25 sheets of the image. Is the problem resolved?
Yes
Finished!
No
Contact your service representative.
Note:
• If you cannot change the leading edge margin, paper misfeeding may be
eliminated by reorienting the loaded paper according to its grain. For details
about paper grain and orientation, see "Loading Paper", About This Machine.
To Next Page
Loading...
Need help?
General
