Ricoh D146 - Page 1101

Main SP Tables-3
D146/D147/D148/D149/D150 2-382 System Maintenance Section
3301 [RTP Pattern :Set]
001
Create Intrvl:BW ENG [0 to 200 / 10 / 1pages]
Sets creating interval (K) for RTP pattern.
002
Create Intrvl:FC ENG [0 to 200 / 10 / 1pages]
Sets creating interval (C) for RTP pattern.
011
Page Cnt:BW *ENG [0 to 200 / 0 / 1pages]
Displays sheets counter value (K) for RTP pattern.
012
Page Cnt:FC *ENG [0 to 200 / 0 / 1pages]
Displays sheets counter value (C) for RTP pattern.
021
M/A UppErr:K ENG
[0.000 to 1.000 / 0.600 /
0.001mg/cm2/step]
Sets error decision threshold (K) for SC380 RTP patter error.
022
M/A UppErr:Col ENG
[0.000 to 2.000 / 1.200 /
0.001mg/cm2/step]
Sets error decision threshold (CMY) for SC381 to SC383 RTP patter error.
023
M/A LowErr:K ENG
[0.000 to 1.000 / 0.100 /
0.001mg/cm2/step]
Sets error decision threshold (K) for SC385 RTP patter error.
024
M/A LowErr:Col ENG
[0.000 to 1.000 / 0.200 /
0.001mg/cm2/step]
Sets error decision threshold (CMY) for SC386 to SC388 RTP patter error.
031
Feed Cnt :Set *ENG [0 to 99999999 / 50000 / 1ms/step]
Totals up ON time of sub hopper feed clutch (Reset when toner end sensor
detects toner).
041
Feed Cnt :K *ENG [0 to 99999999 / 0 / 1 ms/step]
Totals up ON time of sub hopper feed clutch (K).
042 Feed Cnt :C *ENG [0 to 99999999 / 0 / 1 ms/step]