Punch Unit PU3040
D146/D147/D148/D149/D150 2-130 SM
2.20 PUNCH UNIT PU3040
2.20.1 ACCESSORY CHECK
Description Q’ty
Tapping screws - M3x 6 3
Decal - EMC Address 1
Knob Screw - M4 1
Hopper 1
Holder 1
Punch Unit Cover 1
Lower Front Cover 1
Lower Rear Cover 1
2.20.2 INSTALLATION PROCEDURE
§ When installing this option, turn the power to the machine off, and unplug the power plug
from the wall socket.
§ If it is installed when the power is on, it will result in an electric shock or a malfunction.
§ When supplied together with the “Internal Finisher SR3130”, attach this option before
installing the “Internal Finisher SR3130”
§ If the “Internal Finisher SR3130” is already attached, attach this option after removing the
To Next Page
Loading...
