Ricoh D146 - Page 924

Main SP Tables-2-1
System Maintenance Section 2-205 D146/D147/D148/D149/D150
SP Mode Tables
005 ImageTransfer:Middle:Bk *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / 24 /
1uA/step]
006 ImageTransfer:Middle:C *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / 24 /
1uA/step]
007 ImageTransfer:Middle:M *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / 26 /
1uA/step]
008 ImageTransfer:Middle:Y *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / 28 /
1uA/step]
009 Image Transfer:low:Bk *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / 16 /
1uA/step]
010 Image Transfer:low:C *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / 16 /
1uA/step]
011 Image Transfer:low:M *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / 18 /
1uA/step]
012 Image Transfer:low:Y *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / 19 /
1uA/step]
2360
[Common:BW:Env.CorrectionTable]
Sets image transfer output environment correction table per line speed in BW
mode.
001 Image Transfer:standard *ENG [1 to 100 / 2 / 1/step]
002 Image Transfer:Middle *ENG [1 to 100 / 2 / 1/step]
003 Image Transfer:low *ENG [1 to 100 / 2 / 1/step]