Ricoh D146 - Page 989

Main SP Tables-2-2
D146/D147/D148/D149/D150 2-270 System Maintenance Section
2516
[Thick2:SwitchTimingLeadEdge]
Sets switch timing for paper transfer ampere leading edge correction per
thickness / printing sides.
003 Paper Transfer:1side *ENG [0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG [0 to 50 / 0 / 2mm/step]
2517
[Thick2:TrailEdgeCorrection]
Sets output value [%] for paper transfer ampere trailing edge correction per
thickness / printing sides.
003 Paper Transfer:1side *ENG [0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG [0 to 995 / 100 / 5%/step]
2518
[Thick2:SwitchTimingTrailEdge]
Sets switch timing for paper transfer ampere trailing edge correction per
thickness / printing sides.
003 Paper Transfer:1side *ENG [0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG [0 to 50 / 0 / 2mm/step]
2523
[Thick3:Bias:BW]
Sets paper transfer ampere per thickness / mode (FC/BW) / printing sides.
003 PaperTransfer:1side *ENG
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) / 11 /
1-uA/step]
004 PaperTransfer:2side *ENG
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) / 15 /
1-uA/step]