Ricoh FT5535 - Page 174

10.7 TONER SUPPLY RATIO SELECTION
When: If the standard setting for the toner supply amount is
not appropriate for the type of original in use.
Purpose: To adjust the toner supply amount. The value of the
toner supply ratio should match the proportion of
black on typical originals used by the customer.
How: Detect supply mode: SP2-222
TD sensor supply mode: SP2-208-002
Fixed supply mode: SP2-208-003
All three service programs change the toner supply
clutch ON period.
SP2-222: Toner Supply Ratio (Detect Supply Mode)
Setting 1 2 3 4
Toner Supply
Ratio
7% 15% 30% 60%
SP2-208-002: Toner Supply Ratio (TD Sensor Supply Mode)
Setting 1 2 3 4
Toner Supply
Ratio
7% 15% 30% 60%
SP2-208-003: Toner Supply Ratio (Fixed Supply Mode)
Setting 1 2 3 4
Toner Supply
Ratio
2% 4% 6% 11%
FT5535/4527/4522 5-58 FSM