E522: End fence jogger home position sensor error 1 (A156/A160 only)
- Definition - [C]
The end fence jogger home position sensor remains de-actuated for
8.0 seconds when the jogger home position initialization procedure is performed.
- Possible Causes -
• End fence jogger home position sensor defective
• End fence jogger motor defective
• Duplex control board defective
• Main control board defective
E523: End fence jogger home position sensor error 2 (A156/A160 only)
- Definition - [C]
The end fence jogger home position sensor remains actuated for
1.0 second when the jogger home position initialization procedure is performed.
- Possible Causes -
• End fence jogger home position sensor defective
• End fence jogger motor defective
• Duplex control board defective
• Main control board defective
E524: Side fence jogger home position sensor error 1 (A156/A160 only)
- Definition - [C]
The side fence jogger home position sensor remains de-actuated for
5.0 seconds when the jogger home position initialization procedure is performed.
- Possible Causes -
• Side fence jogger home position sensor defective
• Side fence jogger motor defective
• Duplex control board defective
• Main control defective
FSM 6-37 FT5535/4527/4522
To Next Page