1. Enter the required SP mode. (Do not press after entering this SP
mode until you are sure that you want to reset the counters.)
NOTE: Before pressing the
key, be sure to check again whether you
have selected the correct SP mode number or not.
2. Press the
key, then the selected counter will be reset.
2.2.2 Reset All Counters: SP7-808
This SP mode resets the following counters:
Counter to be Reset Counter check
Operation Time SP7-001
Total Original Scan Counter SP7-002
Copy Counters by Paper Size SP7-101
Total Sheets of Paper fed from the Paper Trays SP7-204
DF Original Counter SP7-205
Stapler Counter SP7-206
Reduction/Enlargement/Full Size Copy Counters SP7-301
Total Service Call Counter SP7-401
Individual Service Call Counters SP7-402
Total Jam Counter SP7-501
Total Copy Jam Counter SP7-502
Total Original Jam Counter SP7-503
Copy Jam Counters for Each Location SP7-504
Original Jam Counters for Each Location SP7-505
PM Counter SP7-803
1. Enter SP7-808.
(Do not press the key after entering this SP
mode until you are sure that you want to reset the counters.)
NOTE: Before pressing the key, be sure to check again whether you
wish to reset these counters or not.
2. Press the
key. The above counters are all reset.
FT5535/4527/4522 4-10 FSM
To Next Page
Loading...
