Ricoh FT5535 - Page 8

Copy Number Input: Ten-key pad, 1 to 999 (count up or count down)
Manual Image Density
Selection:
7 steps
Automatic Reset: 1 minute is the standard setting; it can be changed to
a maximum of 999 seconds or no auto reset by SP
mode.
Copy Paper Capacity:
Paper Tray By-pass Feed LCT
A153 copier About 500 sheets x2 About 40 sheets –
A156 copier About 500 sheets x1 About 40 sheets About 1000 sheets
A157 copier About 250 sheets x2 About 40 sheets –
A160 copier About 250 sheets x1 About 40 sheets About 1000 sheets
A161 copier About 250 sheets x2 About 40 sheets –
A162 copier About 250 sheets x1 About 40 sheets About 1000 sheets
Duplex Tray Capacity
[A156/A160/A162]:
50 sheets (30 sheets for A3/11"x17"
81 ~ 105g/m
2
, 21.5 ~ 27.9 lb paper)
Toner Replenishment: Cartridge exchange (415 g/cartridge)
Toner Yield: 17K Copies/cartridge
Developer Replenisment: Type 1 (1Kg.)
Developer Yield: A153/A156 @ 120K
A157/A160 @ 100K
A161/A162 @ 100K
Optional Equipment: • Platen cover
• Document feeder
• Paper tray unit with two paper trays
• Paper tray unit with three paper trays
• 10 bin micro sorter
• 20 bin mini sorter
• 10 bin sorter stapler
• 20 bin sorter stapler(Not used with A161/A162 copiers)
• Sorter adapter (required when installing 20 bin
mini sorter, 10 bin sorter stapler, or 20 bin sorter
stapler for A157, A160, A161, and A162 copiers)
• Key counter
• Tray heater
• Optical anti-condensation heater
• Original length sensor for 11" x 15" size paper
(only for LT/DLT version)
• ADS sensor for particular types of red original
• Zoom (10 Key) Function Decal *
• Margin Adjustment Function Decal*
Rev. 7/95
*Not used on FT4022/4522 (A161/A162)
FT5535/4527/4522 1-4 FSM