33
Using Memo Increment with
Temporary Memos
Memo increment can be used with temporary
memos.
1.
Create a temporary description
that ends in a number (GP.30).
2.
Select [On] for [Memo Increment].
Select [On] for [Memo Increment] in the
camera memo menu.
3.
Select the item.
In the camera memo dialog, press ! or "
to highlight the item with the temporary
description you created in Step 1 and press
$ to view descriptions for the highlighted
item.
4.
Select the temporary description.
Temporary descriptions are indicated
by a “+”. Press ! or " to highlight the
description and press $ to display the
memo increment dialog.
5.
Edit the number.
Press ! or " to choose a new number and
press MENU/OK twice to return to shooting
mode. The new number will be recorded
with the next photograph taken.
Voice Memos
Each item in a memo can have as a description
an audio recording of up to 30 seconds in
length. Voice memos can be created and edited
in both shooting and playback mode.
• Voice recordings are deleted from the memo
list when the camera is turned off. Voice
recordings already stored in memos that have
been appended to photos are not affected.
• Voice memos can be played back on the
computer when photographs are displayed in
the supplied ME1 software.
Recording Voice Memos
1.
Select an item.
Press ! or " to highlight an item in the
camera memo dialog and press $ to view
descriptions for the highlighted item.
2.
Select [Record].
Press ! or " to highlight [Record] and
press MENU/OK to display the recording
dialog.
To Next Page
Loading...
