Ricoh HZ15 - Portrait Mode; Panorama Mode

25
In Portrait Mode, the camera is set to automatically
adjust exposure for realistic capture of skin tones.
Press the button to select Portrait mode ( ).
Portrait Mode
Panorama Mode
Panorama Mode allows you to create a panoramic
picture. The camera will automatically compose a
panoramic picture using the individual shots that you
take.
Follow these easy steps to create a panoramic picture:
1. Press the button to select Panorama Mode
( ).
2. Press the arrow button to select a shooting
direction. (The right direction is used as default if
you do not make any choice) 2 seconds later, the
camera is ready to take pictures. You can also
press the button or half press the shutter button
to be ready to take pictures.
3. Compose the rst view of the panoramic picture
on the LCD screen and press the Shutter button to
capture the image.
4. After the rst shot is taken, the semi-transparent
image of the rst shot will appear at the edge of
the screen. You can use this image to compose
your picture before you press the Shutter button to
capture and nish manual stitching.