Ricoh HZ15 - Reset; FW Version

68
FW Version
Use this setting to view the current camera rmware
version.
1. Press the button, press the up/down arrow
button to select and press the button to
enter the menu.
2. Press up/down arrow button to select and
press the button or right arrow button to enter
the menu.
3. Press the up/down arrow button to select「FW
Version」and press the button or right arrow
button to enter the menu.
4. When there is a new rmware version in the SD
card, select「Yes」to update.
Reset
Use this setting to restore the camera to its original
default settings.
1. Press the button, press the up/down arrow
button to select and press the button to
enter the menu.
2. Press up/down arrow button to select and
press the button or right arrow button to enter
the menu.
3. Press the up/down arrow button to select
「Reset」and press the button or right arrow
button to enter the menu.
4. Press the up/down arrow button to select「Ye s」
or「No」and press the button to conrm.