Ricoh HZ15 - Video System

70
Video System
Use this feature to switch the video system from
either NTSC or PAL.
1. Press the button, press the up/down arrow
button to select and press the button to
enter the menu.
2. Press up/down arrow button to select and
press the button or right arrow button to enter
the menu.
3. Press the up/down arrow button to select「TV-
System」and press the button or right arrow
button to enter the menu.
4. Press the up/down arrow button to select
「NTSC」or「PAL」and press the button to
conrm.
The video output signal can be switched to NTSC or
PAL to accommodate different regional TV standards.
The appropriate setting will vary between regions.
NTSC: USA, Canada, Taiwan, Japan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
Note: The TV output will not display properly if an
incorrect video system is selected.