English
7
CAUTION
• Be sure to push the power cord plug fully into the wall outlet. Also, do not
push it into loose and unstable wall outlets likely to cause a contact failure.
Doing so can result in heat generation.
• Be sure to disconnect the plug from the wall outlet and clean the prongs and
the area around the prongs at least once a year. Allowing dust to build up on
the plug constitutes a fire hazard.
• If you do not use the machine for a long period of time such as consecutive
holidays, be sure to disconnect the power cord plug from the wall outlet for
reasons of safety.
• When performing maintenance on the machine, disconnect the power cord
from the wall outlet for safety.
• Power Source
220–240 V, 8 A or more, 50/60 Hz
Please be sure to connect the power cord to a power source as above.
For users in Norway, this product is also designed for an IT power distribution
system with phase-to-phase voltage of 230V.
Requirements during Emergencies
WARNING
• Do not touch this machine if a lightning strike occurs in the immediate vicinity.
Doing so could result in electric shock.
• Be sure to install the machine as close as possible to a wall outlet so that you
can disconnect the power cord plug easily in an emergency.
• If the machine behaves unusually as follows, turn off the power immediately.
After turning off the power, make sure to disconnect the power cord plug from
the wall outlet, and then contact your service representative and report the
problem. Continuously using the power cord can result in fire or electric shock.
• The machine is emitting smoke
• The machine is emitting odors
• Metal objects or other foreign objects have fallen inside the machine
• Water or other fluids have fallen inside the machine
• If the machine topples or a cover or other part is damaged, turn off the power
immediately. After disconnecting the power cord plug from the wall outlet,
contact your service representative. Using the machine continuously can
result in fire or electric shock.
Requirements for Relocating Machines
CAUTION
• When moving the machine, do not hold the control panel. Doing so may
damage the control panel and can result in injury or malfunction.
• When moving the machine with the optional paper tray unit attached, do not
push the upper part of the main unit forcibly. Doing so can cause the main
unit to detach from the optional paper tray unit, possibly resulting in injury.
• When carrying or moving the machine by lifting it for relocation to another
floor, contact your service representative. Dropping or toppling the machine
can result in injury or malfunction.
• After moving the machine, use the caster fixture to fix it in place. Otherwise,
the machine might move or topple over to cause injury.
• When moving the machine, make sure to unplug the power cord from the wall
outlet and confirm that line cords and other connecting cables have been
removed. Otherwise, the power cord is damaged, possibly resulting in fire
or electric shock.
Requirements for Using the Machine
CAUTION
• Do not look into the light source. Doing so may damage your eyes.
• Do not use stapled sheets of paper, aluminum foil, carbon paper, or any kind
of conductive paper. Doing so can result in fire.
• Keep SD cards and USB flash memory devices out of reach of children. If a
child accidentally swallows an SD card or USB flash memory device, consult
a doctor immediately.
• When lowering the ADF, do not place your hands on the hinges and exposure
glass. Your hands or fingers are caught, which can result in injury.
• If the lower paper tray is installed, do not pull out more than one tray at a time.
Pressing down forcefully on the machine's upper surface might cause the
machine topple over, possibly resulting in injury.
To Next Page
Loading...
Need help?
General
