Off: Select when server authentication is not required.
Japanese Character Code
Select the Japanese character code used on the LDAP server (if applicable).
Search Conditions: Enter the attributes as keywords for search conditions, Name, Email Address, Fax No.,
Company Name, or Department Name using up to 64 characters. Confirm and specify the server
environment to be used. Because attributes are used for searching in the Address Book of the LDAP Server,
a search is disabled if attributes are left blank.
Search Options: Specify [Attribute] and [Display Name] according to the server you are using.
Attribute: Enter the attribute for optional search conditions as necessary. For example, to search
using the employee number, register "employeeNo" as an attribute. Once search options are stored,
register the key display names.
Display Name: Enter the display name of the column in which search options are entered. For
example, if the search option is the employee number, register "employeeNo".
Press [Connection Test].
After checking the connection with the LDAP server, set the search conditions
or key display name.
Press [OK].
Press [Close].
Press [Home] ( ), and then log out of the machine.
To Next Page
Loading...
