Selecting a location for the printer
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install
any options, leave enough room for them also. It is important to:
• Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
• Provide a flat, sturdy, and stable surface.
• Keep the printer:
– Away from the direct airflow of air conditioners, heaters, or ventilators
– Free from direct sunlight, humidity extremes, or temperature fluctuations
– Clean, dry, and free of dust
• Allow the following recommended amount of space around the printer for proper ventilation:
1
Right Side 31 cm (12 in.)
2
Left Side 31 cm (12 in.)
3
Front 51 cm (20 in.)
4
Rear 31 cm (12 in.)
5
Top
1
137 cm (54 in.)
1
Allows for addition of all output options.
Learning about the printer
13
To Next Page
Loading...
