5 Load the paper stack:
• Print side facedown for single-sided printing
• Print side faceup for duplex printing
Note: Paper must be loaded differently in the trays if an optional StapleSmart
TM
II Finisher is installed.
Without an optional StapleSmart II Finisher With an optional StapleSmart II Finisher
Single-sided printing Single-sided printing
Duplex (two-sided) printing Duplex (two-sided) printing
Note: Notice the maximum fill line on the side of the tray which indicates the maximum height for loading paper.
Do not overload the tray.
6 If necessary, adjust the paper guides to lightly touch the sides of the stack, and lock the length guide for the paper
sizes indicated on the tray.
Loading paper and specialty media
53
To Next Page
Loading...
