Ricoh M 320FB User Manual

Connection has Succeeded but the Wireless
LAN Cannot be Used
Problem Possible cause Solution
A connection has been
established but the
wireless LAN cannot be
used.
An Ethernet cable is
connected to the
machine.
If Ethernet and wireless LAN are both
connected, Ethernet has priority. To use the
wireless LAN, disconnect the Ethernet cable
from the machine.
Connection may fail due
to radio wave
conditions.
If there is another wireless network nearby, the
wireless connection may fail. Wait for a while,
and then connect to the network again.
2. Troubleshooting
20

Ricoh M 320FB Specifications

General

Functionality	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Paper Capacity	250 sheets
Duplex Printing	Yes
ADF Capacity	50 sheets
Copy Resolution	600 x 600 dpi
Scan Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed (Black)	32 ppm
Mobile Printing	Apple AirPrint, Mopria
Copy Speed (Black)	32 cpm