Why are images printed on the reverse side of the paper by my Ricoh All in One Printer?
This issue occurs because you may have loaded the paper incorrectly. To resolve this, load the paper correctly into your Ricoh All in One Printer.
Why is my Ricoh All in One Printer unable to connect to the network?
The machine might be unable to connect to the network due to a network error. Ensure that the Ricoh All in One Printer is correctly connected to the network and properly configured. If the issue persists, contact your network administrator for assistance. If the indicator lamp remains lit even after troubleshooting, contact your service representative.
What to do if an error has occurred on Ricoh MP 9003 All in One Printer?
An error has occurred because a function which has the status "Error Occurred" in the [Check Status] screen is defective. Press [Check] in the function which the error has occurred. Then read the displayed message, and take the appropriate action. You can use other functions normally.
Why does Ricoh MP 9003 have frequent misfeeds?
Frequent misfeeds can occur if the staple cartridge is not set correctly. Set the staple cartridge properly in your Ricoh All in One Printer.
Why do misfeeds occur frequently with Ricoh All in One Printer?
Frequent misfeeds can occur if you are using curled paper, which can also cause soiled paper edges, or slipped positions while performing staple or stack printing. Try the following: * Take the stiffness out of the paper with your hands to straighten out the curl. * Load the paper upside down so that the curled edges face downward. * Lay cut paper on a flat surface to prevent paper from curling, and do not lean it against the wall.
What to do if an error message is still displayed, even if the indicated cover is closed on Ricoh MP 9003?
The error message may be displayed because one or more of the covers that are not indicated are still open. Close all the covers of the Ricoh All in One Printer.
What to do if an error message is still displayed on Ricoh All in One Printer, even if misfed paper is removed?
The error message may persist because paper is still jammed in the tray. Remove the jammed paper by following the procedures displayed on the control panel of your Ricoh All in One Printer.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Maximum Paper Size | 13" x 19.2" |
| Duplex Printing | Yes |
| Automatic Document Feeder | Yes |
| ADF Capacity | 220 sheets |
| Copy Resolution | 600 x 600 dpi |
| Print Speed | 90 ppm |
| Connectivity | USB, Ethernet, Wi-Fi |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps (optional) |
| Paper Capacity | 8, 300 sheets maximum |
Protect documents from unauthorized access and control machine settings.
Embed patterns on printouts to prevent unauthorized duplication.
Identifies and explains the various parts of the machine.
Details the components and functions of the machine's control panel.
Step-by-step guide on how to make copies using the machine.
Copies two 1-sided pages or one 2-sided page onto a 2-sided page.
Saves documents on the machine's hard disk for later printing.
Transmit documents using stored settings for fax, IP-Fax, etc.
Precautions and steps for adding toner to the machine.
Explains status icons indicating machine needs attention.
Common operating issues and their solutions.
Solutions for issues related to network connectivity and settings.
Error messages and solutions encountered during printing.
To Next Page
