Ricoh MP 9003 User Manual

Printing Stored Documents
Prints stored documents on the Document Server.
The items you can specify on the printing screen are as follows:
• Paper tray
• The number of prints
• [Finishing] ([Sort], [Rotate Sort], [Stack], [Staple], [Punch], [Half Fold: Print Outside])
• [Cover/Slip Sheet] ([Front Cover], [Front/Back Cover], [Designate/Chapter], [Slip Sheet])
• [Edit / stamp] ([Margin Adj.], [Stamp])
• [2 Sided Copy Top to Top], [2 Sided Copy Top to Bottom], [Booklet], [Magazine]
For details about each function, see the each section.
1. Select a folder.
2. Select a document to be printed.
3. When printing two or more documents at a time, repeat Step 2.
Up to 30 documents can be printed.
4. When specifying printing conditions, press [To Printing Screen], and then configure print
settings.
5. Enter the number of print copies with the number keys.
The maximum quantity that can be entered is 999.
6. Press [Start].
Printing Stored Documents
117

Ricoh MP 9003 Specifications

General

Print Resolution	1200 x 1200 dpi
Functions	Print, Copy, Scan, Fax
Maximum Paper Size	13" x 19.2"
Duplex Printing	Yes
Automatic Document Feeder	Yes
ADF Capacity	220 sheets
Copy Resolution	600 x 600 dpi
Print Speed	90 ppm
Connectivity	USB, Ethernet, Wi-Fi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps (optional)
Paper Capacity	8, 300 sheets maximum