Ricoh MP C3003

Category Item Settings
Security Device Certificate
Certification
S/MIME
Select the installed device certificate.
Security Device Certificate
Certification
IPsec
Select the installed device certificate.
Security Network Security
Security Level
[FIPS 140]
After setting this to [FIPS 140], be sure to
click [OK].
Security Network Security
TCP/IP
IPv6
[Inactive]
Security Network Security
HTTP - Port 80
IPv4
[Close]
Doing this will also set "IPv4" to [Close]
in "Port 80" in "IPP".
Security Network Security
SSL/TLS Version
Set "TLS1.2", "TLS1.1", "TLS1.0", and
"SSL3.0" to [Active].
Security Network Security
Encryption Strength
Setting
Check "AES", "3DES", and "RC4".
Security Network Security
FTP
IPv4
[Inactive]
Security Network Security
sftp
IPv4
[Inactive]
Security Network Security
ssh
IPv4
[Inactive]
1. Notes for Administrators
26