Ricoh MP C4503 User Manual

2. Press [Cancel Scanning] or [Cancel TX].
Depending on the transmission mode and function you use, either [Cancel Scanning] or [Cancel
TX] is displayed.
Canceling a Transmission After the Original Is Scanned
Use this procedure to cancel a transmission after the original is scanned.
You can cancel transmission of a file while the file is being sent, stored in memory, or if it fails to transmit.
All the scanned data is deleted from memory.
1. Press the [Stop] key.
CJN024
You can also press [TX/RX Status / Print], and then [Check / Stop Transmission File].
2. Press [Standby File List].
To cancel transmission of a file stored in the memory, press the [File List] tab.
3. Select the file you want to cancel.
If the desired file is not shown, press [ ] or [ ] to find it.
4. Press [Stop Transmission].
5. Press [OK].
To cancel another file, repeat steps 3 through 5.
6. Press [Exit].
After pressing [Check / Stop Transmission File] under [TX/RX Status / Print] in step 1, press [Exit]
twice.
4. Fax
92

Ricoh MP C4503 Specifications

General

Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Type	Color Laser Multifunction Printer
Copy Speed	45 cpm
Fax Resolution	200 x 200 dpi
Duplex Printing	Yes
Monthly Duty Cycle	200, 000 pages
Standard Connectivity	USB, Ethernet
Paper Size	A3, A4, A5, B4, B5
Scan Resolution	Up to 600 dpi
Fax Speed	33.6 kbps
Memory	1.5 GB