Technical Bulletin PAGE: 5/11
Reissued: 26-Dec-16
Modified Points or Symptom Corrected
- Selecting any of the "Black & White" scanning settings.
- Using multi-pass ADF and OCR.
3. An SC819 error might occur when using network-related functions, such as
accessing Web Image Monitor.
4. If "Display" is selected under "Paper Confirmation for Bypass Tray," printing is
available only in LEF.
(User Tool -> Printer Features -> System -> Tray Setting Priority -> Paper
Confirmation for Bypass Tray)
5. The user name will not appear in the screen capture, if the User Code Authorization
function is enabled.
6. Scheduled Printing can falsely be operated without charge, if the system is installed
with the External Charge Unit and the firmware combination is any of the following:
SystemCopy : 1.10 or later and Printer : 1.04 or earlier
SystemCopy : 1.09 or earlier and Printer : 1.05 or later
SystemCopy : 1.10 or later and Printer : 06.00.00 or earlier
SystemCopy : 1.09 or earlier and Printer : 07.00.00 or later
7. The function icons appear slower (approximately 15 sec) than expected.
8. Functions specified with the User Code Authorization cannot be used in SmartSDK.
1. SC673-10 may occur.
2. Operation panel keys do not work or logout from User Authentication is not possible
under the following conditions:
- A Copy job with a large amount of originals is performed
- Following this, the user presses the "Reset" key or accesses the All Job Stop
screen
3. The Quick Scan app may freeze under the following conditions:
- Scanning is set to display the Preview at the same time the data is being stored
- The user displays the Preview after scanning is completed
4. Reception error may occur with W-NET FAX.
5. Even if the device is configured to restrict users from registering a destination in the
address book, as shown below, a user can still register a destination by using the
Scan to Folder Helper application:
- "System Settings > Administrator Tools > Extended Security > Restrict User of
Destination (Fax)" set to "ON".
- "System Settings > Administrator Tools > Extended Security > Restrict User of
Destinations (Scanner)" set to "ON".
6. When Simplified Chinese characters are included in the additional email information,
username, password, a destination folder name, or a filename for SMB/NCP, the
connection is unsuccessful, the data transmission fails, or the body of the email
contains garbled text.
7. When a print job or scan job is being executed, the System Auto Reset timer might
not be set.
Changes were applied for the domestic (Japan) model only.
1. In wireless LAN environments, when A-MSDU is enabled, the device cannot receive
packet data that is more than 2,048 bytes.
2. When trying to establish an ad-hoc connection among three or more devices, the
third and subsequent devices cannot connect.
3. The device cannot communicate when using the WMM (Wi-Fi Multimedia) function.
To Next Page
