Ricoh MP C4503 - Page 76

Technical Bulletin PAGE: 7/11
Reissued: 26-Dec-16
Model: MET-C1ab_SOP
Date: 01-Aug-13
No.: RD147031y
Version
Modified Points or Symptom Corrected
Other changes:
- If a job from a remote HDD is printing on a device with ELP-NX v2 installed, if the
device where the print job is spooled encounters high CPU usage, SC997 will not
occur but the message "Loading... Please wait." will appear.
3.07
Japanese domestic market only
3.06
Symptom corrected:
1. Cannot access flash memory on the controller board.
2. SC819-00 occurs when performing a Scan to Folder job.
3. Cannot login by IC card when password login is enabled.
4. SC990 occurs when card authentication is enabled.
5. Copy color authentication is disabled when card authentication is enabled.
3.05
Symptom corrected:
1. The Java VM does not boot up at main power ON when SP5-730-001 is enabled.
2. The Waste Toner Bottle information in User Tools (Inquiries menu) cannot be printed
out.
3. The print job can be cancelled by users other than the owner of the job under the
following conditions:
- UP mode > system setting > Administrator tools > User Authentication
Management > Basic Auth., AND
- UP mode > system setting > Administrator tools > Extended Security >
Authenticate current job > Access privilege, AND
- UP mode > system setting > Administrator tools > Stop key to suspend print job
> All print job
Other changes:
4. SP5199 can be used to enable or disable paper exit from the finisher without
stapling.
3.04
Symptom corrected:
- SC899 occurs the second time a name is searched via the LDAP server.
- SC899 occurs when creating a searchable PDF document.
- Lower productivity with authentication prints using paper folding.
- Alert notifications might be sent out even if the alert is cancelled before being
generated.
- SC899 occurs if a request is generated if the URL string data in the Web API is
more than 512B.
- Screen transition becomes unavailable when logging in to Cheetah Service SP
mode right after turning the machine power ON.
- ESA application icons do not appear.
- SC998 occurs when a print request is generated in the machine transitioning back
to fusing unit off mode from sleep mode.
- The UI for the double feed detection setting appears in System Settings, even
though this model does not have this function.
- The UI for the Function Priority setting appears in System Settings, even though this
model does not have this function.
- SC998 occurs when logging into Service SP mode from the GW SP screen (and
cannot be cleared with machine OFF/ON).
- Machine stalls and memory shortage error occurs when scanning through a Web
browser application.
- The user cannot log out of normal authentication if logging out of EQ authentication