Ricoh MP C5504 Series User Manual

17. Check that [SMB] is selected.
18. Press [Change] or [Browse Network], and then specify the folder.
To specify a folder, you can either enter the path manually or locate the folder by browsing the
network.
19. Press [Connection Test] to check the path is set correctly.
20. Press [Exit].
If the connection test fails, check the settings, and then try again.
21. Press [OK].
22. Press [User Tools] (
) on the top right of the screen.
23. Press [Home] ( ) at the bottom of the screen in the center.
Locating the SMB folder manually
1. Press [Change] under "Path".
2. Enter the path where the folder is located.
For example: if the name of the destination computer is "User", and the folder name is "Share", the
path will be \\User\Share.
Basic Procedure When Using Scan to Folder
137

Ricoh MP C5504 Series Specifications

General

Print Speed (Black/Color)	55 ppm (Black/Color)
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Standard Functions	Print, Copy, Scan, Fax
Control Panel	10.1" Smart Operation Panel
Scan Resolution	600 dpi
Fax Transmission Speed	33.6 Kbps
Connectivity	USB, Ethernet
Network Connectivity	Ethernet
Operating System Compatibility	Windows, macOS, Linux
Paper Capacity (Standard/Maximum)	1, 200 sheets / 4, 700 sheets