Message Cause Solution
"Duplex Cancelled" Duplex printing was canceled. • Select the proper paper
size for the duplex
function. For details about
paper, see "Specifications
for the Main Unit",
Maintenance and
Specifications.
• Change the setting for
"Apply Duplex" in [System
Settings] to enable duplex
printing for the paper tray.
For details about setting
"Apply Duplex", see "Tray
Paper Settings",
Connecting the Machine/
System Settings.
"Exceeded Max. Pages
(Collate)"
The number of pages exceeds
the maximum number of sheets
that you can use Collate with.
Reduce the number of pages to
print.
"Exceeded the maximum
number of multi-sheet fold (Half
Fold)."
The maximum number of multi-
sheet folds (Half Fold) was
exceeded.
For details about the maximum
number of multi-sheet folds (Half
Fold), see "Fold", Print.
"Output Tray Changed" The output tray was changed
because the paper size of the
specified output tray is limited.
Specify the proper output tray.
"Print Overrun" Images were discarded while
printing.
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver
Help.
"Punch has been cancelled." Punch printing was canceled. Check the paper orientation,
print orientation, and then
punch position. Certain settings
can produce print results that
might not be as expected.
Messages Displayed When You Use the Printer Function
215
To Next Page
Loading...
Need help?
General
