Ricoh MP C5504 Series User Manual

Message Cause Solution
"Error has occurred in the
scanner driver."
An error has occurred in the
driver.
• Check whether the network cable
is connected correctly to the client
computer.
• Check whether the Ethernet board
of the client computer is
recognized correctly by
Windows.
• Check whether the client
computer can use the TCP/IP
protocol.
"Error has occurred in the
scanner."
The application-specified
scan conditions have
exceeded the setting range
of the machine.
Check whether the scanning settings
made with the application exceed the
setting range of the machine.
"Fatal error has occurred in
the scanner."
An unrecoverable machine
error has occurred.
An unrecoverable machine error has
occurred. Contact your service
representative.
"Insufficient memory. Close
all other applications, then
restart scanning."
Memory is insufficient. • Close all the unnecessary
applications running on the client
computer.
• Uninstall the TWAIN driver, and
then reinstall it after restarting the
computer.
Messages Displayed When You Use the Scanner Function
235

Ricoh MP C5504 Series Specifications

General

Print Speed (Black/Color)	55 ppm (Black/Color)
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Standard Functions	Print, Copy, Scan, Fax
Control Panel	10.1" Smart Operation Panel
Scan Resolution	600 dpi
Fax Transmission Speed	33.6 Kbps
Connectivity	USB, Ethernet
Network Connectivity	Ethernet
Operating System Compatibility	Windows, macOS, Linux
Paper Capacity (Standard/Maximum)	1, 200 sheets / 4, 700 sheets