Ricoh MP C6502SP - Page 113

008
Contrast: 1-255 *ENG [1 to 255 / 128 / 1/step]
Sets Contrast level (1 to 255) for Scan Apli: Text mode. 128 is for No Correction, Larger
the value, Stronger the Contrast.
009
Ind Dot Erase: 0(Off) 1-7 (Weak-
Strong)
*ENG [0 to 7 / 0 / 1/step]
Sets Independent Dot Erase level for Scan Apli: Text mode. 0 is for OFF, Larger the value,
Stronger the Erase.
4552 [Scan Apli:Txt Dropout]
005
MTF: 0(Off) 1-15 (Weak-Strong) *ENG [0 to 15 / 8 / 1/step]
Sets emphasis level for Scan Apli: Text (Drop Out Color) mode. 0 is for OFF, Larger the
value, Stronger the emphasis.
006
Smoothing: 0(x1) 1-7 (Weak-
Strong)
*ENG [0 to 7 / 4 / 1/step]
Sets Smoothing level for Scan Apli: Text (Drop Out Color) mode. 0 is for OFF, Larger the
value, the Smoother.
007
Brightness: 1-255 *ENG [1 to 255 / 128 / 1/step]
Sets Brightness level (1 to 255) for Scan Apli: Text (Drop Out Color) mode. 128 is for No
Correction, Larger the value, the Brighter.
008
Contrast: 1-255 *ENG [1 to 255 / 128 / 1/step]
Sets Contrast level (1 to 255) for Scan Apli: Text (Drop Out Color) mode. 128 is for No
Correction, Larger the value, Stronger the Contrast.
009
Ind Dot Erase: 0(Off) 1-7 (Weak-
Strong)
*ENG [0 to 7 / 0 / 1/step]
Sets Independent Dot Erase level for Scan Apli: Text (Drop Out Color) mode. 0 is for OFF,
Larger the value, Stronger the Erase.
4553 [Scan Apli:Txt/Photo]
005
MTF: 0(Off) 1-15 (Weak-Strong) *ENG [0 to 15 / 8 / 1/step]
Sets emphasis level for Scan Apli: Text/Photo mode. 0 is for OFF, Larger the value,
Stronger the emphasis.
SP4-XXX (Scanner)
111