Ricoh MP C6502SP - Page 134

001
White level:F ENG
[0 to 65535 / 0 / 1/step]
Bit15:Unused
Bit14: Unused
Bit13:White level abnormal (F
side/RED/EVEN pixel)
Bit12: White level abnormal (F
side /RED/ODD pixel)
Bit11: White level abnormal (F side /
GREEN/EVEN pixel)
Bit10: White level abnormal (F side /
GREEN/ODD pixel)
Bit9: White level abnormal (F side /
BLUE/EVEN pixel)
Bit8:White level abnormal (F side /
BLUE/ODD pixel)
Bit7: Unused
Bit6: Unused
Bit5:gain abnormal (F side /RED/
EVEN pixel)
Bit4: gain abnormal (F
side /RED/ODD pixel)
Bit3: gain abnormal (F side /GREEN/
EVEN pixel)
Bit2: gain abnormal (F side /
GREEN/ODD pixel)
Bit1: gain abnormal (F side /BLUE/
EVEN pixel)
Bit0: gain abnormal (F side /
BLUE/ODD pixel)
Shows cause of error when an error occurs during the white level adjustment when scanner
turns on.
When an error, SC142-00(F side/white level adjustment error)will be given.[format]
binary
Scan adjust error (F side/White level) flag=
(b15,b14,b13,b12,b11,b10,b9,b8,b7,b6,b5,b4,b3,b2,b1,b0)
2. Main SP Tables-4
132