004
White level:L ENG
[0 to 65535 / 0 / 1/step]
Bit15: Unused
Bit14: Unused
Bit13: White level abnormal (L
side/RED/EVEN Pixel)
Bit12: White level abnormal (L
side/RED/ODD Pixel)
Bit11: White level abnormal (L side/
GREEN/EVEN Pixel)
Bit10: White level abnormal (L side/
GREEN/ODD Pixel)
Bit9: White level abnormal (L side/
BLUE/EVEN Pixel)
Bit8:White level abnormal (L side/
BLUE/ODD Pixel)
Bit7: Unused
Bit6: Unused
Bit5: Gain abnormal (L side/RED/
EVEN Pixel)
Bit4: Gain abnormal (L
side/RED/ODD Pixel)
Bit3: Gain abnormal (L side/GREEN/
EVEN Pixel)
Bit2: Gain abnormal (L side/
GREEN/ODD Pixel)
Bit1: Gain abnormal (L side/BLUE/
EVEN Pixel)
Bit0: Gain abnormal (L side/
BLUE/ODD Pixel)
Shows cause of error when an error occurs With the White level adjust when scanner turns
on.
When an error, SC142-00 (L side/White level adjust error) will be given.
[format] binary
Scan adjust error (F side/SSCG correction) flag=
(b15,b14,b13,b12,b11,b10,b9,b8,b7,b6,b5,b4,b3,b2,b1,b0)
SP4-XXX (Scanner)
135
To Next Page
Loading...
