006
SSCG Correction:L ENG
[0 to 65535 / 0 / 1/step]
Bit7: Unused
Bit6: Unused
Bit5: SSCG correction error (L
side/RED/EVEN Pixel)
Bit4: SSCG correction error (L
side/RED/ODD Pixel)
Bit3: SSCG correction error (L side/
GREEN/EVEN Pixel)
Bit2: SSCG correction error (L side/
GREEN/ODD Pixel)
Bit1: SSCG correction error (L side/
BLUE/EVEN Pixel)
Bit0: SSCG correction error (L side/
BLUE/ODD Pixel)
Shows cause of error when an error occurs With the SSCG Noise correction when scanner
turns on.
When an error, Correction turns off.
[format] binary
Scan adjust error (L side/SSCG correction) flag= (b7,b6,b5,b4,b3,b2,b1,b0)
007
FL Correction ENG
[0 to 65535 / 0 / 1/step]
Bit7: Unused
Bit6: Unused
Bit5: Unused
Bit4: Unused
Bit3: Unused
Bit2:FL Correction error (RED)
Bit1:FL Correction error (GREEN)
Bit0:FL Correction error (BLUE)
Shows cause of error when an error occurs with FL correction check (SP4-491-002) during
scanner unit warranty process.
When an error, Correction turns off and SP4-490-001/002/003 will reset.
[format] binary
Scan adjust error (SSCG correction) flag= (b7,b6,b5,b4,b3,b2,b1,b0)
SP4-XXX (Scanner)
137
To Next Page
Loading...
