033
Pxl Cnt:M *ENG [0 to 1000000 / 0 / 1cm2/step]
Displays how many square centimeters of toner are consumed in M coverage after Toner
Near End is fixed.
034
Pxl Cnt:Y *ENG [0 to 1000000 / 0 / 1cm2/step]
Displays how many square centimeters of toner are consumed in Y coverage after Toner
Near End is fixed.
041
Set Feed Cnt *ENG [0 to 99999999 / 0 / 1msec/step]
Sets the timing when Toner End is confirmed after how many ms Feed Clutch of Sub
Hopper is driven after Toner Near End is fixed.
051
Feed Counter:K *ENG [0 to 99999999 / 0 / 1msec/step]
Displays how many ms Feed Clutch (K) of Sub Hopper is driven after Toner Near End is
fixed.
052
Feed Counter:C *ENG [0 to 99999999 / 0 / 1msec/step]
Displays how many ms Feed Clutch (C) of Sub Hopper is driven after Toner Near End is
fixed.
053
Feed Counter:M *ENG [0 to 99999999 / 0 / 1msec/step]
Displays how many ms Feed Clutch (M) of Sub Hopper is driven after Toner Near End is
fixed.
054
Feed Counter:Y *ENG [0 to 99999999 / 0 / 1msec/step]
Displays how many ms Feed Clutch (Y) of Sub Hopper is driven after Toner Near End is
fixed.
3150
[TE Sensor :Set]
-
001
SamplingCount *ENG [4 to 20 / 5 / 1count/step]
Sets TE Sensor Array Size.
002
Judge:p *ENG [0.2 to 0.8 / 0.6 / 0.1/step]
Sets Toner Remain Judgment Threshold.
SP3-XXX (Process)
19
To Next Page
Loading...
