208
Error Code CTL
[-2147483647 to 2147483647 /
- / -/step]
Displays a number that describes the error code that was issued when either SP5816-204
or SP5816-207 was executed.
Cause Code Meaning
Illegal Modem
Parameter
-11001 Chat parameter error
-11002 Chat execution error
-11003 Unexpected error
-11004
Cutting process occurred during modem
communication.
-11005 NCS reboot occurred during modem communication.
Operation
Error,Incorrect
Setting
-12002
Inquiry, registration attempted without acquiring
device status.
-12003
Attempted registration without execution of an inquiry
and no previous registration.
-12004
Attempted setting with illegal entries for certification
and ID2.
-12005
@Remote communication is prohibited. The device
has an Embedded RC gate-related problem.
-12006
A confirmation request was made after the
confirmation had been already completed.
-12007
The request number used at registration was different
from the one used at confirmation.
-12008
Update certification failed because mainframe was in
use.
-12009
D2 mismatch between an individual certification and
NVRAM.
-12010 Certification area is not initialized.
3. Main SP Tables-5
318
To Next Page
Loading...
