Ricoh MP C6502SP - Page 322

003
RCG Port *CTL [0 to 65535/ 443 / 1/step]
Sets the port number of the RCG (Remote Communication Gate) destination for call
processing at the remote service center.
004 RCG URL Path *CTL
[0 to 16 characters (half characters)
Default /RCG/services/ -]
5824
[NV-RAM Data Upload]
Uploads the NVRAM data to an SD card. Push Execute.
001 NV-RAM Data Upload CTL
[- / - / -]
[Execute]
5825
[NV-RAM Data Download]
Downloads data from an SD card to the NVRAM in the machine. After downloading is
completed, remove the card and turn the machine power off and on.
001 NV-RAM Data Download CTL
[- / - / -]
[Execute]
582
8
[Network Setting]
001
IPv4 Address(Ethernet/IEEE
802.11)
*CTL [00000000h to FFFFFFFFh / 11.22.33.44 / -]
002
IPv4 Subnet Mask (Ethernet/
IEEE 802.11)
*CTL
[00000000h to FFFFFFFFh /
000.000.000.000 / -]
003
IPv4 Defult Gateway
(Ethernet/IEEE 802.11)
*CTL
[00000000h to FFFFFFFFh /
000.000.000.000 / -]
006 DHCP(Ethernet/IEEE 802.11) *CTL
[0 to 1 / 1 / 1/step]
0: Not use
1: Use
021 Active IPv4 Address CTL [00000000h to FFFFFFFFh / 00000000h / -]
022 Active IPv4 Subnet Mask CTL [00000000h to FFFFFFFFh / 00000000h / -]
3. Main SP Tables-5
320