005 Fixed USB Port *CTL
[0 to 2 / 0 / 1/step]
0: OFF
1: Level 1
2: Level 2
006 PnP Model Name *CTL
[Letters(up to 20) / Laser Printer / -/
step]
007 PnP Serial Number *CTL [Letters(up to 12) / - / -/step]
008 Mac Supply Level *CTL
[0 or 1 / 1 / 1/step]
0: OFF
1: ON
100 Notify Unsupport *CTL [0 or 1 / 1 / 1/step]
5845
[Delivery Server Setting]
Provides items for delivery server settings.
001
FTP Port No. *CTL [1 to 65535 / 3670 / 1/step]
Sets the FTP port number used when image files to the Scan Router Server.
002
IP Address (Primary) *CTL
[000.000.000.000 to
255.255.255.255 / - / 1/step]
Use this SP to set the Scan Router Server address. The IP address under the transfer tab can
be referenced by the initial system setting.
006
Delivery Error Display Time *CTL [0 to 999 / 300 / 1sec/step]
Use this setting to determine the length of time the prompt message is displayed when a test
error occurs during document transfer with the NetFile application and an external device.
008
IP Address (Secondary) *CTL
[000.000.000.000 to
255.255.255.255 /
000.000.000.000 / 1/step]
Specifies the IP address assigned to the computer designated to function as the secondary
delivery server of Scan Router. This SP allows only the setting of the IP address without
reference to the DNS setting.
3. Main SP Tables-5
332
To Next Page
Loading...
