014
Server Port Number (Primary) *CTL [1 to 65535 / 80 / 1/step]
This SP is used for the scan router program.
015
Server URL Path (Primary) *CTL [ Up to 16 byte / - / -/step]
This SP is used for the scan router program.
016
Server Scheme (Secondary) *CTL [ Up to 6 char / - / -/step]
This SP is used for the scan router program.
017
Server Port Number (Secondary) *CTL [1 to 65535 / 80 / 1/step]
This SP is used for the scan router program.
018
Server URL Path (Secondary) *CTL [ Up to 16 byte / - / -/step]
This SP is used for the scan router program.
022
Rapid Sending Control *CTL
[0 or 1 / 1 / -/step]
0: Control disabled
1: Control enabled
Enables or disables the prevention function for the continuous data sending error.
5846 [UCS Setting]
001
Machine ID (for Delivery Server) *CTL [- / - / -]
Displays the unique device ID in use by the delivery server directory. The value is only
displayed and cannot be changed. This ID is created from the NIC MAC or IEEE 1394
EUI. The ID is displayed as either 6-byte or 8-byte binary.
002
Machine ID Clear(for Delivery
Server)
*CTL
[- / - / -]
[Execute]
Clears the unique ID of the device used as the name in the file transfer directory. Execute
this SP if the connection of the device to the delivery server is unstable. After clearing the
ID, the ID will be established again automatically by cycling the machine off and on.
003
Maximum Entries *CTL [2000 to 20000 / 2000 / 1/step]
Changes the maximum number of entries that UCS can handle.
If a value smaller than the present value is set, the UCS managed data is cleared, and the
data (excluding user code information) is displayed.
3. Main SP Tables-5
334
To Next Page
Loading...
