107
Acquire Only Opepanel Debug
Logs
*CTL
[- / - / -]
[Execute]
Outputs the controller debug log to the media inserted front I/F.
5858
[Debug Save When]
These SPs select the content of the debugging information to be saved to the destination
selected by SP5857-002.
SP5858-3 stores one SC specified by number. Refer to Section 4 for a list of SC error
codes.
001
Engine SC Error
(0: OFF, 1: ON)
*CTL
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
Turns on/off the debug save for SC codes generated by copier engine errors.
002
Controller SC Error
(0: OFF, 1: ON)
*CTL
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
Turns on/off the debug save for SC codes generated by GW controller errors.
003
Any SC Error *CTL [0 to 65535 / 0 / 1 /step]
Sets the SC code whose logs are collected.
004
Jam(0: OFF 1: ON) *CTL
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
Turns on/off the debug save for jam errors.
5859
[Debug Save Key No.]
These SPs allow you to set up to 10 keys for log files for functions that use common memory
on the controller board.
SP5-722 to 998 (Mode)
347
To Next Page
Loading...
