026
S/MIME: MIME Header *CTL
[0 to 2 / 0 / 1 /step]
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
Selects the MIME header type of an E-mail sent by S/MIME.
028
S/MIME: Authentication Check *CTL
[0 to 1 / 0 / 1/step]
0: No (not check)
1: Yes (check)
Specifys whether to check destination certificate when sending S/MIME mail.
5866 [E-Mail Report]
001 Report Validity CTL [0 or 1/ 0 / 1/step]
005 Add Date Field *CTL [0 or 1/ 0 / 1/step]
5870 [Common Key Info Writing]
001
Writing CTL
[- / - / -]
[Execute]
Writes the authentication data (used for NRS) in the memory.
003
Initialize CTL
[- / - / -]
[Execute]
Initializes the authentication data in the memory.
004
Writing: 2048bit CTL
[- / - / -]
[Execute]
Writes the authentication data 2048bit (used for NRS) in the memory.
5873 [SD Card Appli Move]
SP5-722 to 998 (Mode)
349