002
Trigger *ENG [0 to 3 / 0 / 1/step]
Specifying Target Trigger group for Engine Log Upload.
5907 [Plug & Play Maker/Model Name]
001
Plug & Play Maker/Model/
Name
*CTL [- / - / -]
Selects the brand name and the production name for Windows Plug & Play. This
information is stored in the NVRAM. If the NVRAM is defective, these names should be
registered again.
After selecting, press the "Original Type" key and "#" key at the same time. When the
setting is completed, the beeper sounds five times.
5913
[Switchover Permission Time]
-
001 Print Application Timer *CTL [0 to 30 / 3/ 1/step]
5919
[HDD Encryption]
-
001 Display Operating State *CTL
[0 or 1 / 0 / 1/step]
0: OFF (Not working)
1: ON (Working)
5959 [Paper Size]
001
1st Tray (Tandem) *ENG [0 or 1 / 0 / 1/step]
Size settings for Tandem Tray/Tandem LCT.
002
1st Tray (A3 Kit) *ENG [0 or 1 / 0 / 1/step]
Size settings for A3 Extension Tray
003
A4 LCT: Paper size *ENG [0 or 1 / 0 / 1/step]
Sets paper size for A4 LCT.
SP5-722 to 998 (Mode)
355
To Next Page
Loading...
