Ricoh MP C6502SP - Page 391

6314
[FM2 Equal 1/2:FineAdjFld]
Adjusts End (S) when half-folding by using Folding Unit.
[+] makes (S) large and [-] makes (S) small.
Turns to be enabled when Single Sheet is specified.
The cercle is the leading edge of paper, and the dot is the trailing edge of paper.
paper feeding direction
* Only enabled when Custom Paper is not being used in Pro machine.
001 A3 SEF (Single Sheet) ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
002 B4 SEF (Single Sheet) ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
003 A4 SEF (Single Sheet) ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
004 DLT SEF (Single Sheet) ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
005 LG SEF (Single Sheet) ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
006 LT SEF (Single Sheet) ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
007 12"*18" (Single Sheet) ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
008 8-kai (Single Sheet) ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
009 B5 SEF (Single Sheet) ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
019 13"*19" (Single Sheet) ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
SP6-XXX (Peripherals)
389