Ricoh MP C6502SP - Page 41

012
Required Expel Time:C ENG
[0.00 to 655.35 / 0.00 / 0.01sec/
step]
Displays Required Expel Time:C.
013
Required Expel Time:M ENG
[0.00 to 655.35 / 0.00 / 0.01sec/
step]
Displays Required Expel Time:M.
014
Required Expel Time:Y ENG
[0.00 to 655.35 / 0.00 / 0.01sec/
step]
Displays Required Expel Time:Y.
3600 [Select ProCon]
001
Potential Control *ENG [0 to 1 / 1 / 1/step]
Sets Potential Control.
002
LD Control *ENG [0 to 3 / 0 / 1/step]
Sets LD Control.
003
TC Adj. Mode *ENG [0 to 3 / 2 / 1/step]
Sets Execution Timing for TC Adjustment ProCon.
004
ACC RunTime ProCon *ENG [0 to 3 / 2 / 1/step]
Executes the same operation from SP as that of ACC RunTime ProCon.
005
TC Adj. Times *ENG [1 to 10 / 5 / 1/step]
Sets the maximum value for Adjustment Loop Number for TC Adjustment ProCon.
010
ActivePotentialControl *ENG [0 to 1 / 0 / 1/step]
Sets Active Potential Control.
040
DEMS Select *ENG [0 to 1 / 0 / 1/step]
Sets DEMS Select.
070
IMSSe Select *ENG [0 to 1 / 0 / 1/step]
Sets IMSSe Select.
SP3-XXX (Process)
39