• When documents already stored on the document server are printed, the count for the application
that started the print job is incremented.
•
When the print job is started from a network application (Desk Top Binder, Web Image Monitor,
etc.) the L: counter increments.
8041 [T:TX Jobs/LS] *CTL These SPs count the applications that stored
files on the document server that were later
accessed for transmission over the telephone
line or over a network (attached to an e-mail,
or as a fax image by I-Fax).
[0 to 9999999 / 0 / 1]
Note: Jobs merged for sending are counted
separately.
The L: counter counts the number of jobs
scanned from within the document server
mode screen at the operation panel.
8042 [C:TX Jobs/LS] *CTL
8043 [F:TX Jobs/LS] *CTL
8044 [P:TX Jobs/LS] *CTL
8045 [S:TX Jobs/LS] *CTL
8046 [L:TX Jobs/LS] *CTL
8047 [O:TX Jobs/LS] *CTL
• When a stored copy job is sent from the document server, the C: counter increments.
•
When images stored on the document server by a network application or Palm2 are sent as an e-
mail, the O: counter increments.
8051 [T:TX Jobs/DesApl] *CTL
These SPs count the applications used to send
files from the document server over the
telephone line or over a network (attached to
an e-mail, or as a fax image by I-Fax). Jobs
merged for sending are counted separately.
[0 to 9999999 / 0 / 1]
The L: counter counts the number of jobs sent
from within the document server mode screen
at the operation panel.
8052 [C:TX Jobs/DesApl] *CTL
8053 [F:TX Jobs/DesApl] *CTL
8054 [P:TX Jobs/DesApl] *CTL
8055 [S:TX Jobs/DesApl] *CTL
8056 [L:TX Jobs/DesApl] *CTL
8057 [O:TX Jobs/DesApl] *CTL
• If the send is started from Desk Top Binder or Web Image Monitor, for example, then the O:
counter increments.
8061
[T:FIN Jobs]
These SPs total the finishing methods. The finishing method is specified by the application.
6. Main SP Tables-8
620